Wirelessly Send Your Cable TV Signal to Another Room
Sources: CNBgear . Wirelessly Send Your Cable TV Signal to Another Room
With wireless being the norm for so many of our electronic devices
today, it’s pretty surprising to me that the standard way to connect a cable box to your TV is still with physical cables. And the surprise
turns into annoyance when I want to put a TV in a room where I don’t
have a cable outlet.
I had this situation when I bought my current house. I wanted to put a
TV in my living room but there was no outlet there and neither option
for putting one in—running the wires along the ceiling and floorboards
inside the house or running them over the roof on the outside—was
desirable.
Fortunately, after doing some research, I found the PAKITE 8 Channel Remote Wireless Video Transmitter & Receiver System(known as av sender, and one set av sender contains a transmitter and a receiver or two receivers), which sends the
cable TV signal wirelessly from the cable box in my bedroom to my living
room TV. Since then, I’ve upgraded my system from the PAT-580 model wireless HDMI,
which has a single input and support transmit HDMI signals wirelessly by 300 Meters, but it's output resolution is 720x576P, not is 1080P, but I found it's very ok when I watch the TV shows. And their after services is very good!
Note: These systems can also be useful even if you
have them in the same room as your TV, but connecting devices with a
cable isn’t ideal, e.g. if the TV is mounted on the wall.
Recommend reading:
PAKITE Brand HDMI Wireless A/V Sender - feature
PAKITE Brand HDMI Video Sender - Parameter
PAKITE HDMI Video Sender - Advantage
Wireless digital/analog TV sender | PAKITE
PAKITE Wireless IR Extender PAT-433
No comments:
Post a Comment