The difference between Smart series and Wireless series tv sender | PAKITE

The difference between Smart series and Wireless series tv sender

Right now, PAKITE had develop three series wireless tv sender (also known as wireless av sender, Digisender, or wireless video transmitter), so let’s check two series difference between Smart series and Wireless series av sender.

Smart series av sender, let’s take a example av sender model PAT-226, PAT-226 is 2.4Ghz frequency band, support 150 meter transmission range at line of sight, support both digital and analog signal transmission, support 38/56khz infrared remote control, PAT-226 support two group av input.

Wireless series av sender, let’s take example av sender model PAT-330, PAT-330 is 2.4Ghz frequency band, support 150 meter transmission range at line of sight, support both digital and analog signal transmission, but do not support ir remote control.PAT-330 only support one group av input.

PAT-226 support ir remote control, so the unit price will be much higher than PAT-330, it doesn’t means PAT-226 quality is much better, both quality is good. But as for the function PAT-330 without ir remote control is more favorable for cctv camera user, PAT-226 support ir remote control is much convenient for tv user change channels.

Besides, if av sender PAT-330 connect with cctv camera, you may need one pcs BNC to AV converter, so you can connect the transmitter with cctv camera. As for av sender PAT-226, please noticed both transmitter and receiver should be connect with AV Jack also.

If any question about wireless av sender, welcome leave message at www.pakite.net .


recommend reading: 
Two TV sharing one set-top box in my house
PAT-556, Send Your TV Signal Wirelessly to Another Room
What is wireless a/v sender?

Wireless Security Cameras | PAKITE

Wireless Security Cameras

author: av sender supplier Pakite  time: 2016.11.23

Wireless security cameras are a tempting option when looking to purchase a new security system. With all the standard features of a wired security camera, including IR night vision and motion detection (as well as audio monitoring on select models), wireless security products provide convenience without compromise. Just connect your camera to a nearby power source and your security system will be up and running in no time.

Save time and money
No video cables run through building materials or underground. The only requirement is connecting the camera to an electrical outlet.
Placement flexibility
It’s easy to monitor detached buildings and move your cameras to different locations (provided there is a nearby power source).
Tamper-resistant
Skilled intruders can disrupt a wired security camera by tampering with the video cable. This is not a worry for wireless systems.

Analog and Digital Wireless Technology

There are two types of wireless cameras - analog and digital. Analog wireless cameras use a separate transmitter to connect them to a digital video recorder (DVR). Digital wireless cameras (or WiFi cameras) connect to the internet and are designed to be used with computers, smartphones or tablets.

How do I power a wireless security camera?

It is important to note that wireless cameras still require electricity to power them and need to be plugged into an electrical outlet. The term "wireless" refers to the lack of a video cable between the camera and the receiver. There are wireless security cameras on the market that are battery operated, but they do not provide 24/7 recording and require plenty of maintenance.


recommend reading:
HDMI VS SD Wireless AV Transmitter
Wireless IR Remote Control
Why We Choose Wireless Audio-Video Transmitter and Receiver?

Details about AV Sender should be concerned | PAKITE

Recently, we received many feedback from end user about wireless av sender(also known as wireless video sender, Digisender, wireless av transmitter and receiver, and so on), but I found that over 99.99% clients ask for help is because the product can not work.

Some of message like this: my tv or satellite receiver do not have AV Jack, only HDMI & USB or TV jack, so what should I do? Could you give me best solution?

For this condition, I have to say if no AV jack, it definitely can not work, and no good solutions. So before ordered, we have to double check both satellite receiver and television.

in the pic: PAKITE wireless tv signal transmitter, multi room tvs connect one set top box by wirelessly

Some of message like this: I had order PAT-220, but now I need connect second tv at the second floor, could you give me your suggestion?

For this condition, You may need to order model PAT-260 if you need connect with two set television at difference floor. PAT-220 can not workable at difference floor normally. Besides, PAT-260 receiver is workable with PAT-220 transmitter, but the transmission distance should be depend on the short one, please noticed.

One clients leave message: after connect with wireless av sender, he got black and white picture, if you meet that condition, please pay attention:

a.  PAKITE brand wireless av sender is suitable for monitor size not over 42 inch.

b. The system of TV should be PAL or NTSC.

c. Make sure the receiver were placed within transmission range.

d. Set Top Box output weak signal, but this condition is not common.

Finally, please noticed, 2.4GHz frequency band transmitter is not workable with 5.8GHzfrequency band receiver.


Recommend reading:
What is HDMI Wireless A/V Sender? | PAKITE
PAKITE Wireless Audio Video Sender PAT-220
Zero Interference Wireless A/V Sender
PAKITE Wireless A/V Transmitter Review

Vehicle Monitoring can replace the Vehicle Recorder (author: pakite)

Author: Pakite

As we know, right now, most of TAXI has vehicle monitoring in side, but at that time the order follows lead to many dispute, overall the effect is good. Previous reports that a taxi driver was robbed, the robbers were soon arrested since the vehicle monitoring.

First, vehicle recorder also named car black box, it can recorder the driving route , some Vehicle recorder with GPS function, it support record the driving route, video output, loop recording, detection and other functions, also it could combine with the reverse image , easy to install and can effectively record the vehicle in front.

Vehicle Monitoring is usually for monitoring inside , we vehicle monitoring is more suitable for installed on the buses to guard against poachers.  besides ,vehicle monitoring has a system for support many cameras, driver could install many monitoring in the car for all-around monitoring.

Secondly, Vehicle Monitoring work temperature is 0 to 50 DEG, so it can be workable at used inside of the car.   But if Vehicle Recorder work for private car the working temperature at least 50 degrees, this characteristic is can not beyond by Vehicle Monitoring.

Third, Vehicle Monitoring usually has two storage devices, a hard disk a SD card, SD card Anti vibration but less storage space, maintenance costs is highest! Ordinary hard support 300g can be used continuously for a month; and recorder memory card is usually 8G,16G,32G support the lecture video, the price is cheaper.

Fourth, the installation method, the Vehicle Monitoring installation is much trouble, usually the cost of the installation including the camera costs, hard disk, material, installation costs, etc., and drive recorder installation is relatively simple, you can get it.

Fifth, the Vehicle Monitoring is hardly to working 24 hours by continuously, many riders feeling vehicle recorder battery is not durable, so their want to use the vehicle monitoring, but vehicle monitoring consumption is beyond the vehicle recorder , if used for a long time the battery will be scrapped, not worth the do it!

Vehicle Recorder is much suitable for personal use, Vehicle Monitoring is more suitable for bus system.

recommend reading:

Five reasons to choose PAKITE
PAKITE PAT-220 AV Sender Reviews
What can PAT-220 AV Wireless Transmitter and Receiver do ?

What is HDMI Wireless A/V Sender? | PAKITE

What is HDMI Wireless A/V Sender

What the difference between HDMI and AV Jack?

HDMI(High Definition Multimedia Interface),HDMI is professional digital output/input, that support transmit both audio and video at the same times, the highest transmission speed is 2.25GB/s.

AV jack is for transmit audio video by separate, it’s consist of Red, White, Yellow, cable, the Yellow is for transmit video signal, the Red is for transmit left audio, and White is for transmit right audio.

HDMI AV Sender(known as HDMI Video Sender) including which jack?

A HDMI Wireless AV Sender contains a Transmitter and a Receiver. The transmitter jack including one group HDMI input and one group HDMI output, DC input and IR cable jack. The receiver jack including one group HDMI output, DC input.

How to connect the HDMI AV Sender(Wireless HDMI Transmitter and Receiver)?

First, Let’s connecting the transmitter: Two sets tv only need one sets AV Sender(one transmitter and one receiver), the first step ...

More>> What is HDMI Wireless A/V Sender?

recommend reading:

How Wireless audio video TV Transmitter Work
Story of TV Signal Transmitter and TV Receiver
2.4GHz / 5.8GHz Indoor Wireless Video System

Newest wireless audio video transmission device with HDMI jack | PAKITE

May be you still don't know that, a wireless av sender not just a single audio video transmission device for TV, that means it can be "TV to TV", "TV to set top box", "TV to DVD player", "CCTV camera to DVR", "IPTV to IPTV" and so on. An av sender fits for any device with RCA/AV port, such as TV, DVD player, set top box,  DVR, CCTV Camera, and so on. That isn't a surprising case any more.

But a new av sender you never heard is, it's not full HD 1080P HDMI video sender, but with HDMI jack's av sender, the 720x576P output resolution wireless hdmi transmitter and receiver from PAKITE. It's a new born av sender in the whole world. Nowadays, more and more device such as TV DVD set-top box coming with HDMI port, so, PAKITE brand 720x576p wireless hdmi sender will be the main av transmission product in the future.

Click the picture or the words with 'hdmi' in the URL, will bring you to the page of hdmi product.

Note: the PAKITE hdmi video sender output resolution(720x576p) is better than a wireless av sender, but it requires the video source is 1080P. And the TV size no more than 40 inch.


recommend reading:
AV Signal Sender
A/V Sender for Satellite Receiver
Analog Transmitter and Receiver