Where to find a long distance transmission Wireless TV HDMI extender?

Source: Where to find a long distance transmission Wireless TV HDMI extender?

Where to find a long distance transmission Wireless TV HDMI extender?

I had bought one set rca jack iptv transmitter receiver for transmitting my IPTV signal room to room, and recently, I bought a blu ray player to connect the televisions, but the device is hdmi port, so I need to buy a wireless tv HDMI extender to transmit the video wirelessly. After do some investigation, I found the wireless hdmi extender which with full hd output resolution is very expensive and it's transmission range is too short to make me satisfied.

Finally, I found a long distance wireless hdmi extender by searching the keywords on google, and this product is fit for me very much. It has 300 meters wireless transmission range in an open air, and 8 selectable channel, 5.8 ghz Frequency Band to avoid interference from a 2.4ghz wifi-route and other wireless device. Besides, it's installation method is very easy, the video of installation is also offered by the company. There are two hdmi port in the transmitter, and "HDMI OUT" for connecting television by using hdmi cable, "HDMI IN" for connecting my signal source blu ray by using hdmi cable. There is one hdmi port in the receiver, this port for connecting television by using hdmi cable. Once connected, my two televisions sharing one blu ray player wirelessly came true. Though the wireless hdmi transmitter receiver output resolution is 720*576p, but the image quality is ok for me, because the rca transmitter receiver output resolution is 480p.

Thanks a lot for buying this product from PAKITE, I got a best service from the company, and it's only one developer and manufacturer of this 300m hdmi product.



Recommend reading:
300m HDMI signal AV Wireless Transmitter and Receiver | PAKITE
Smart AV Sender PAT-556 How to review a film from set-top box by wireless?

How to review a film from set-top box by wireless?

Article from: How to review a film from set-top box by wireless?

After the end of the work , after dinner busy home chores, the remaining work, walking, before the break is accompanied by family watching TV entertainment. Before the cable TV, free nest in which housing to open the TV can read, since the installation of the digital set-top box is not so convenient, only a family gathered in the living room on the sofa. Usually cold weather still nothing, to the winter when the cold, especially want to nest in the warm blanket to enjoy the fun of the film, now is the Internet age, when you can take a computer Yeah, or IPAD in bed to watch, but from the Too close, first of all bad eyes, followed by the screen is too small, why would you choose to go to the cinema? Want to spend the money in the bedroom to worry about this problem, although willing to spend some money to install the set-top box, but the decoration of the house, I do not want to poke a hole where a nail affect the beautiful, if there is a similar WIFI wireless transmission equipment How nice it is.

Asked friends, we are in the network TV set-top box how to use wireless in the bedroom to see movies and feel helpless. The first time in Baidu search the next, just want to try, did not expect to actually receive PAKITE reply, give me a detailed description of the PAKITE Brand network set-top box wireless av transmitter, according to the description in the bedroom , Still have contact information. So want to know more about how to set up the tower set-top box av transmitter wireless transmission audio and video.

After the telephone consultation to understand, PAKITE network set-top box wireless transmitter only RCA interface(HDMI jack Wireless Transmitter was launched at 2016.09), set-top boxes and TV is not RCA interface can not be used, the TV screen to be less than 43 inches below, or affect the transmission quality. The channel of the transmitter and receiver should be tuned, otherwise the receiver can not receive any program. Set-top box to the signal input to the transmitter, wirelessly sent to the receiver, and then through the output interface input to the TV, just a RCA line can be achieved, simply very convenient. According to their own needs, to buy whether the function with infrared transponder models, but the price is different. The key is that the two TV at the same time to watch, can only see the same program, which is a little less in the ointment, but in the acceptance, to see everyone's needs and choose. At least, Pa flag network set-top box wireless transmitter from the essence can solve the wireless movie problem, it is worth a try.

Recommend reading:

The Difference between PAT-550 and PAT-580 | PAKITE

Satellite Receiver and Wireless AV Extender Transmitter/Receiver

If I need wireless av transmitter receiver for different floor? | PAKITE

Which model is best wireless av extender?

According to the current situation, the digital set-top boxes are commonly used in various cities and towns, then each family also need to solve a problem how to make one pcs set-top box signal sharing to many pcs of television. For solve the problem, PAKITE technology developed a product called wireless AV Sender(known as wireless av extender, video sender), it’s wireless transmission, no need wire, support plug and play, perfect solve the problems. 

As for most of enterprise, after development of a new product, it will be extension a series products with more strong and full function. PAKITE developed three series wireless av senders with different function after get positive feedback from market. As before-sales service, the high frequency problem is the "PAKITE has many models of wireless av transmitter and receiver, what is the difference, and how do I know which model is best for me?" as for such problems, let me tell you more about this.

If you don’t know how to choose a best wireless av extender for your family, then you have to know”

1.Whatever how many TV you have, but only one sets TV, wireless transmitter and receiver will help you solve this problem. It’s perfect plan to solve one set-top box with many pcs TV.

2.In case you have to control the program at set-top box end, and you wanna control the TV program at bedroom, then you should choose the wireless av sharing device with IR Remote control.

3.Predict the transmission distance between living room and bedroom, and how many walls between this two room, submit to PAKITE before sales service, she will let you know which one is most favorable for you in case you buy the strongest model with highest money.

4.If you already enjoy the convince that wireless av extender brings to you, please kindly tell the others.


Recommend reading:
Transmitting a HDMI Signal Without Wires
300m HDMI signal AV Wireless Transmitter and Receiver | PAKITE
How to Build a Bluetooth Transmitter and Receiver

Meeting video sender

What is a video sender?

Video senders (also known as AV senders) allow you to send TV signals around your home without wires. They use radio waves to send the signals, and you need a transmitter and a receiver.

They can transmit over fairly short distances, through walls, although if you’re trying to transmit through several walls, or over a long distance, they can be less effective.

How do they work?

Connect the output of a set-top box, DVD player or other video source into a transmitter(AV Cable) . Then connect the receiver to your second TV (AV Cable). Signals are sent over the air.

Where do I get a video sender?

For a wide range of wireless senders, check out PAKITE Wireless AV Sender 

I’m getting interference. What can I do?

Most models of Video Sender allow you to change channels, so’s not to cause interference. Try changing the channel both at the transmitter and receiver end, and trying again.

More questions about product, welcome feedback to mail:pawm611@pakite.net

Artical from: http://www.linkedin.com/pulse/wireless-av-sender-pakite-lay-eily

Recommend reading:
PAT-580 5.8GHz HDMI Wireless TV Transmitter and receiver Specification | PAKITE
Full HD Wireless AV Sender
Compare HDMI & DisplayPort

Some skills about wireless av sender

Who made the Wireless av sender(what is it)?
PAKITE is manufacture of wireless av sender,Located in shenzhen China, Over 8 years av sender produce experience, all of PAT series is our own design patent, 2.4/5.8GHz CE FCC Certificate and RoHS had passed.

Wireless av sender is for what?
Wireless av sender is for sharing digital single from one device to another device by wireless sharing, This technology no need to connect wifi, the wireless just send and receiver between transmitter and receiver.

How to use wireless av sender?
Just connect the transmitter part with the digital source, then connect receiver part with the tv or any other device for show the video, onece power on, it will be started work, easy to use and install.

How to choose the best one?
All the wireless device is according the use environment to choose the best suitable, but not the best one.since the 2.4GHz frequency band support strong penetrated ability, and 5.8GHz frequency band is support strong anti-interference, If use in the different floor or so many walls between transmitter and receiver,we will suggest PAT-360,PAT-260 or PAT-266 for you, if use in the same room or between room, any items is ok.

What the best advantage of AV Sender?
Example: the user have one set top box but not only one tv, and many tv in the different rooms and different floor. 

In this case,Typical: you have to buy many set top box and fix up cables from one room to another room, from first floor to another floor.

Now you have our product: whatever how many tv with one set top box is ok, one set top box connect one transmitter and each tv connect each receiver, no need to fix up any cable between different rooms and different floor.

If you are still confuse about wireless av sender, pls contact pawm611@pakite.net

Artical from: http://www.linkedin.com/pulse/some-skills-wireless-av-sender-lay-eily?trk=mp-reader-card

Recommend reading:

How to Avoid Distortion in A/V Transmitters

Can I use two sets wireless tv sender in my home?

Full HD Wireless AV Sender

DVD to TV HDMI A/V Transmitter Installation | PAKITE

HDMI/SDI Wireless AV Sender for photograph and television

Wireless make connection become more simple and convenience, so wireless had become the tendency.

Now, there is many kinds of Wireless AV Sender in the market, like wireless a/v sender for television, for cctv camera, for photograph......, all of av senders has the same basic function, but there still has a little difference.

Here attached PAKITE 
new model 300 meter 
HDMI av sender, 
it is used with 
television for 

transmission 
AV Signal from 
set top box to TV, 
so both Audio and 
Video will be transmit 
at the same time without latency.
It's the 'worth the money' wireless hdmi.

The following is a/v sender 

for photograph, it’s used 

with photograph for 

transmit video only, it’s 

no Compression video.

Now, Wireless AV Sender could be an independent industry, more kinds of wireless av sender come out and become more professional.


Recommend reading:
PAT-260 Wireless Strong Penetration A/V Transmitter from PAKITE
Zero Interference Wireless A/V Sender
Transfer a Wireless TV Signal

Family av friend

Article from @Flickr: Family av friend

Most families own not just one television, because there are multi rooms in their house. But they do not wish to buy multi cable box(set top box) and pay the month fee on it, and running many wires in room.
 So, the HDMI av sender(for input and output device with HDMI port) must be a good friend of them. Let's see what benefit it has.
 1)Place your TV anywhere you like
 Watch your favourite movie in your bedroom, cheer for your favourite football team in the garden or play your kids videos in their room while you’re having dinner with your friends downstairs.
 Why be limited to one room when you can have the freedom to enjoy anywhere you like? The Wireless HDMI Sender connects your AV devices and lets you control them from a different room. The signal quality stays optimal, even through a wall or floor.
 2)TV to TV without running cables
 Put an end to threading wires through your walls at home. Connect your AV devices like DVD/STB wirelessly and enjoy wherever you like. Experience full AV quality with no strings attached! The HDMI av signal will be transmitted from transmitter to receiver wirelessly.

Recommend reading:

300 meter HDMI wireless video transmitter

How to Convert Wired Projectors to Wireless?
HDMI 1.3 and HDMI 1.4 Interface | PAKITE

What is HDMI Wireless A/V Sender?

How to use PAKITE PAT-433 Wireless IR Extender?

How to use PAKITE PAT-433 Wireless IR Extender?

First, PAT-433 is a type of wireless IR Extender, it’s used for extension the infrared remote control distance.

PAKITE PAT-433 tv ir sender is 433.92MHz ISM frequency band,support 38KHz IR Remote control, support 200 meter remote control distance at line of sight.

PAKITE PAT-433 including one pcs transmitter and one pcs receiver, as the following picture:

Transmitter

Receiver

Two circumstances:

First: for control tv at from another place.

If you would use PAT-433 ir repeater to control ( increase or reduce) the Volume of tv, then you need put the receiver at tv end, as the following picture 1, and remote control at transmitter end as the picture 2.

picture 1

picture 2

Second: for control Set Top Box/DVD at TV end.

If set top box and TV were placed at different rooms, you would use PAT-433 to control set top box to change program at tv end ...

More>>How to use PAT-433 Wireless IR Extender?



Recommend reading:
Wirelessly Send Your Cable TV Signal to Another Room
PAKITE Brand HDMI Video Sender - Parameter
PAKITE HDMI Video Sender - Advantage
Wireless digital/analog TV sender | PAKITE
PAKITE Wireless IR Extender PAT-433
How to improve the sense of experience?

Details about AV Sender should be concerned | PAKITE

Recently, we received many feedback from end user about wireless av sender(also known as wireless video sender, Digisender, wireless av transmitter and receiver, and so on), but I found that over 99.99% clients ask for help is because the product can not work.

Some of message like this: my tv or satellite receiver do not have AV Jack, only HDMI & USB or TV jack, so what should I do? Could you give me best solution?

For this condition, I have to say if no AV jack, it definitely can not work, and no good solutions. So before ordered, we have to double check both satellite receiver and television.

in the pic: PAKITE wireless tv signal transmitter, multi room tvs connect one set top box by wirelessly

Some of message like this: I had order PAT-220, but now I need connect second tv at the second floor, could you give me your suggestion?

For this condition, You may need to order model PAT-260 if you need connect with two set television at difference floor. PAT-220 can not workable at difference floor normally. Besides, PAT-260 receiver is workable with PAT-220 transmitter, but the transmission distance should be depend on the short one, please noticed.

One clients leave message: after connect with wireless av sender, he got black and white picture, if you meet that condition, please pay attention:

a.  PAKITE brand wireless av sender is suitable for monitor size not over 42 inch.

b. The system of TV should be PAL or NTSC.

c. Make sure the receiver were placed within transmission range.

d. Set Top Box output weak signal, but this condition is not common.

Finally, please noticed, 2.4GHz frequency band transmitter is not workable with 5.8GHzfrequency band receiver.


Recommend reading:
What is HDMI Wireless A/V Sender? | PAKITE
PAKITE Wireless Audio Video Sender PAT-220
Zero Interference Wireless A/V Sender
PAKITE Wireless A/V Transmitter Review

Wireless TV to TV Sender Buying Guides

Wireless TV to TV Transmitter Buying Guides

In an age of convenience and high-tech home entertainment, many homes now come with more than one television. Today, one finds televisions in kitchens, home offices, bedrooms, and even bathrooms. The main television, usually located in the living room, is where the satellite or cable television box is located. In the past, in order to receive cable or satellite television in more than one room, there needed to be a set-top box in each room. This extra installation required cables and wires, and of course the set-top box itself. Having a TV in every room proved to be expensive. Now, with the advent of the TV to TV sender, a television signal can be transmitted from the main television to the other televisions. The Wireless TV sender allows each television to receive the same television transmission wirelessly without all the additional expense involved in buying and installing set-top boxes in every room.

This convenience has made the TV to TV sender very popular. In order to make an informed decision when selecting a TV to TV sender, the buyer should know the differences between 2.4GHz and 5.8GHz TV to TV senders. It is also important that the the buyer is mindful of some of the TV to TV sender’s limitations. Buyers can find TV to TV senders at local electronics shops, electronics departments in department stores, and online.

How a Wireless TV Sender Works

To make an informed decision when it comes to buying a wireless TV sender, the buyer must first understand how a Wireless TV sender works. A Wireless TV sender is connected to the main television by way of a SCART socket. The SCART socket is the largest socket located on the back of the television.

The wireless TV receiver is plugged into the secondary television by way of its SCART connection. Once connected, the secondary TV is able to receives radio signals transmitted from the TV sender connected to the main television in the other room.

With a Wireless TV sender, the user can view the television signal on two different televisions in two different rooms. The receiver can also send a wireless signal to the TV sender, commanding it to perform specific functions, such as changing the volume. This is only possible through the use of an infrared sensor on the receiver. The remote control for the main television can be used with the receiver from the secondary television. The remote control is pointed at the infrared sensor on the receiver. When the user pushes the volume button, a signal is transmitted from the secondary TV to the TV sender on the main television. It is important to source an additional remote control as this avoids the user having to take the remote control with them when they move to another room to watch television.

Artical from: Wireless TV to TV Sender Buying Guides

Good news: PAKITE hdmi wireless transmitter with hdmi jack is coming soon, and the wireless tv transmitter hdmi is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.


recommend reading:
Wireless HDMI Connection | PAKITE
Video show - wireless connection for TV and any other device with RCA/AV port | PAKITE
My family use it, and it's very good wireless transmit device

Which AV Sender is right for you?

With the time goes by, more and more av sender brands appear in the market, how can I distinguish which model is fight for me?

First, you will need to make is whether you want a Standard Definition or High Definition (HD) AV Sender. This choice may already be made for you based on the equipment you have. Take example by PAKITE Brand, most of wireless av sender belongs to PAKITE is Standard Definition with AV Jack, as if your device only HDMI jack, then PAKITE Brand wireless av sender is not workable. As I know High Definition (HD) hdmi wirelss transmitter will be on sale at next month.

Second, you have to make sure the transmission range, if you will use STB and Monitor at different floor, then I will suggest you choose the av sender with long transmission range like PAT-260 av sender and PAT-266 av sender, if you will use in the same floor but existing many walls between STB(set-top box) and Monitor, then you have to pay attention 150 meter transmission range sender support passed one wall, and 250meter transmission range sender support passed two wall, may be better penetration ability, it’s up to using environment.

Third, you have to make sure the using environment, if you will use the wireless av sender with other wireless device within one house, I will suggest you choose 5.8GHz frequency band senders, 5.8GHz frequency band can avoid interference effectively, it’s because most of wireless device is 2.4GHz, so 5.8GHz frequency band would not getting influence by 2.4GHz. If you will use wireless av sender at different floor, then you have to use 2.4ghz frequency band, in this situation, you can switch channels to change the frequency into a little difference with other device to avoid interference .

If you don't know whether you have standard-definition or high-definition equipment then simply look at the back of your equipment and determine what type of output connections are available.

Artical from: Which AV Sender is right for you?

Good news: PAKITE hdmi wireless transmitter with hdmi jack (hdmi av sender) is coming soon, and the hdmi av sender is used for the TV, cable box(STB), DVD and other device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.


recommend reading:
Reviews of PAT-556 Wireless AV Transmitter Receiver
PAT-260 Wireless Strong Penetration A/V Transmitter from PAKITE
New goods: PAKITE HDMI jack Wireless A/V Sender
Cable TV Transmitter with HDMI jack | PAKITE

Reviews of PAT-556 Wireless AV Transmitter Receiver

Reviews of PAT-556 Wireless AV Transmitter Receiver

　　 The “PAKITE PAT-556 5.8GHz Digital Wireless AV Transmitter Receiver with IR Extender” is a simple and effective way of watching programs from a satellite receiver, set top box or other in one room and a TV set in a different room. 

　　 This is achieved wireless without all the hassle of running additional cabling around the house and with the right conditions can work up to 300 meters range. A lot of home equipment, from routers to Bluetooth devices, use the 2.4GHz frequency band but this system uses the 5.8GHz ISM frequency band which is less prone to interference from other equipment and also offers better transmission quality – a bit like a dual band router does. 

　　It has a number of different selectable channels within the band so you may just need to find the one that works best in your location – a simple procedure.

　　　　This av sender is easy to setup. The back panels on the transmitter and receiver are clearly labeled, which makes setup easy. You simply connect the transmitter unit to the set top box and the receiver unit to the TV or monitor, you will be viewing on using the supplied cables. The Transmitter unit in effect becomes a mini TV transmitter and the Receiver unit becomes a TV tuner and works exactly the same way as your local TV transmitter in miniature. 

　　One nice feature with the device was the IR extender, which allowed me to operate my satellite receiver from another room. The way it works is cool. You plug the IR extender into the transmitter and then put the extender in front of the transmitting device's IR sensor. This is a convenient feature because it makes sense to want to operate the device you are transmitting while watching it.

　　The PAT-556 was supplied for evaluation and review purposes and I can offer an unbiased recommendation as a well made and effective video sender/receiver system.

Artical from: Reviews of PAT-556 Wireless AV Transmitter Receiver

Good news: PAKITE hdmi wireless transmitter with hdmi jack is coming soon, and the wireless tv transmitter hdmi is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.


recommend reading:
Output power of an analog wireless TV sender
Wireless A/V Transmitter and Receiver for CCTV Camera
PAKITE PAT Wireless Audio Video Transmitter and Receiver System
PAT-556, Send Your TV Signal Wirelessly to Another Room