Showing posts with label stb. Show all posts
Showing posts with label stb. Show all posts

Saturday, September 17, 2016

PAT-260 Wireless Strong Penetration A/V Transmitter from PAKITE

PAT-260 - 2.4GHz Wireless Strong Penetration A/V Transmitter from PAKITE

PAKITE Wireless AV transmitter receiver is well knowed and professional. I had been using a 5.8 GHz audio/video system to transmit a video signal from my cable box(Converter Box) to a television one floor below. By placing the transmitter on the floor and the receiver near the ceiling below, I was able to get the units to within about a foot of one another, separated by the floor.
The system worked well until we moved the television to the floor above the Converter Box and, for practical and aesthetic reasons had to separate the link by about 25 to 30 feet with the floor in between. Unfortunately, in this new location, the signal became too weak to establish a wireless link so I decided to try this PAKITE PAT-260 system which is based on 2.4 GHz technology.
A 2.4 GHz signal can penetrate further into solid objects such as a wall or floor than a higher frequency 5.8 GHz signal. As a general rule of thumb, the higher the frequency, the better the video quality but the less penetration ability of the signal. So, if you have "line of sight" or LOS (i.e., no objects between the two units) at a reasonable distance then 5.8 GHz is the preferred system for acouple of reasons.
First, as noted previously, you can get a higher quality picture and, second, you can avoid interference from a range of devices(cordless phones, remote controls, wifi routers, etc.) in the crowded 2.4 GHz band. Of course, I don't have LOS and the increased distance between the transmitter and the receiver make 2.4 GHz my best option.


The system was easy to setup. It consists of two 4" X 3 1/2" unit seach of which has a 6" antenna and a power "cube" that is plugged into a wall outlet. One unit has "wireless transmitter" imprinted on the front, the other imprinted "wireless receiver". Of course, the transmitter is connected to the audio/video source while the receiver is connected to the television display. It comes with two, three-wire(red/white/yellow), audio/video connection cables with male "RCA jack" connectors. These are the cables where red and white are the two stereo audio channels and the yellow is the raw "composite" video signal. (Note: Since they both use the same round connectors, don't confuse the composite video output which carries the video signal on one cable with the red, green, blue "component" output swhich carry the three components of the video signal on three cables.)
Once set up you will need to make sure the transmitter and receiver are operating on the same channel by setting/matching a series of switches on the back of each unit. If you are getting wireless interference, then you will need to step through each channel (a total of eight channels) until you find a clear link. The link will work with any device that has a "composite" video(round yellow connector) and mono or stereo audio connections. So far it is working well for my application.
The PAT-260 av sender also supports a remote control extender which allows you to use an infrared remote to control the video source through the receiver box. Thiss ub-system uses a "reverse" link that transmits the remote signal through a separate wireless connection in which the receiver box "transmits" the remote signal to the transmitter box which then controls the video source. The system comes with an infrared transmission extension cable which is plugged into the transmitter and can be positioned infront of the IR detector on the video source.
I haven't set up this feature because we want to keep the remote control with the downstairs cable box and television. But, if needed, I would expect that we could buy a universal remote and set it up to run through the PAT-260 link.






Good news: PAKITE hdmi wireless transmitter with hdmi jack is coming soon, and the wireless hdmi video transmitter is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.


recommend reading:
Types of AV Senders Wireless
Question of Digital AV Sender for Satellite Receiver
AV Wireless Transmitter with HDMI Jack | PAKITE

Friday, September 16, 2016

Shenzhen PAKITE Technology Co., Ltd.

Shenzhen PAKITE Technology Co., Ltd. since its establishment in 2008, has been committed to wireless audio and video transmission and wireless intelligent control technology.Tradition innovation and the pursuit of excellence, relying on research and development team continue to innovate and continue to invest advanced production equipment and meticulous quality effort. 

    After years of development and practice of accumulation, gradually 2.4G wireless video transmission and 5.8G wireless video transmission,  wireless infrared signal forwarding, HDMI wireless video transmission, wireless intelligent control terminals and digital STB wireless sharing device and other consumer electronics products in the home audio and video, security monitoring, smart home applications market, formed a "PAKITE" own brand recognition at home and abroad, the products are exported to more than 100 countries and regions.





Good news: PAKITE hdmi wireless transmitter with hdmi jack is coming soon, and the wireless tv transmitter hdmi is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.


recommend reading:
Typical program of wireless meeting rooms
HDMI Wireless Transmission System
Smart Home Appliance

Wednesday, September 14, 2016

Four Questions to Ask about Wireless A/V Transmitter and Receiver



 What is wireless A/V transmitter/ receiver?
wireless AV transmitter/ receiver, consists of a transmitter with one or more receivers. It can transmit the color images and sound signal of digital TV set-top boxes, DVD, VCD,satellite receivers, computers and cameras equipment through wireless to any TV or computer screen. Signal in the open distance can send up to 100 meters, clear usually cut off a wall can reach 30 ~ 50 meters, completely cover any corner in the home, using 433 MHZ wireless technology, infrared remote control signal accurately back to audio equipment.


What is the distinguishing feature of wireless A/V transmitter?
* Transmit DVD, VCD, set-top boxes(STB), satellite TV and computer video signals to multiple TVs
* Use 2.4 GHz ISM frequency band
* Four groups of transmission channel used for selection
* 2.4 G built-in antenna, small size
* 433 MHZ infrared wireless remote control back
* External surveillance cameras
* Compatible with NTSC/PAL TV system
* Nowiring, small size, does not occupy a space, your household is decorated completely unaffected;
* Safe,reliable, low power consumption:
* Easy to use: just like using ordinary TV;
*Low prices, bargain: don't increase the cost of equipment, does not need to pay more rent on a monthly ratings cost;
 


Wireless A/V transmitter can bring you any benefits?
The wireless video transmitter can give the existing electrical appliances in the convenience of use bring a qualitative leap, there is no regret from study and sitting room not convenient wiring and isolated from each other's. This product can make free interconnection between many appliances, such as: digital TV set-top box, a converter VCD/DVD player, TV, satellite receiver, LCD TV, plasma TV, video tape recorder, disk recorders, projectors, computer monitors, etc., realize the wireless interactive transmission of video stream.
 


Who needs to purchasea wireless A/V transmitter/ receiver?
* There is more than two television digital TV set-top box users families;
* Want to watch a DVD in the room other than the living room, but don't want to move DVD;
* Need to use television monitoring young children / elderly / patient  family activities (extra wireless camera);
*Multi-TV set-top box digital signal common spaces, such as restaurants,supermarkets, beauty salon, restaurants, clubs and so on.


Tuesday, September 13, 2016

Who needs the Wireless TV Transmitter?

Who needs the audio video Wireless TV Transmitter?

TV audio video transmitter


The wireless av transmitter mentioned here are for the wireless transmission of video and audio signals from STB/ DVD /IPTV to a TV. There are three main uses for a wireless product:

*If your sources are in a different part of the room than the TV, you can send the signal wirelessly instead of running long cables across the floor (or under the floor, or along the baseboards, etc). This is an especially common problem with projectors.

*If you want to mount your TV on the wall, you need to run power and cables. With wireless, you only need to run power to the TV. The signal from your sources gets sent wirelessly to the small receiver box. In the case of the Pakite wireless tv transmitter, the TV itself can often power this wireless receiver.

*If you want to have your sources and TV in two different rooms. Again, the Pakite wireless tv signal transmitter is a good pick here because it is able to transmit through walls , so you can have a TV in the same room as the sources, and a second TV connected wirelessly to the same sources.

*If you have equipment specifically with HDMI outputs (Blu-ray players, cable boxes, Apple TV and Roku streamers, etc.). This is not for products like Chromecast, or any of the Miracast or WiDi products (which wirelessly stream content from tablets, phones, or laptops). Those are a different category, these are replacements for HDMI cables. HDMI interface devices need a hdmi wireless transmitter to transmit audio and hd video signal.


Keep in mind though, there is a cost to the convenience. Wireless is always going be more temperamental than wired, taking a few moments to sync up (connect) and potentially/occasionally dropping out.


How do you connect wireless Audio Video Transmission Kit?

How do you connect wireless AV Transmission Kit?

A wireless AV (audio / video) transmission kit functions in much the same way as a wireless home network, radio frequency waves traveling between the transmitter and a receiver. User just need to Connect the wireless AV transmission kit between a STB and a TV, no need to adjustments wireless signal. All the necessary parts are included in the package, with the exception of AV cables and IR cable.

  • 3 pcs Mini - jack to RCA Jack Cable ;
  • 1 pcs IR Cable ;
  • 2 pcs 5V/1A Power adapter ;
  • 1 pcs User Manual;


Correct connect your wireless audio video transmission kit by the following steps:
1. Place wireless av transmitter with Set-Top Box(STB). Plug one end of the RCA AV cable into the AV output of the STB, Plug the power adapter into a socket for power.
2. Place wireless av receiver with monitor or TV, Plug one end of the RCA AV cable into the AV input of the TV, Plug the power adapter into a socket for power.
3. Place the wireless av receiver next to the TV. Plug one end of the RCA AV cable into the AV input of the TV, Plug the power adapter into a socket for power.
4. Plug RCA plugs on the other end of the av cable into the av outputs on the back of the STB, Plug RCA plugs on the other end of the av cable into the av inputs on the back of the TV.
5. Turn on the TV with the remote. Press Menu. Select "Video input" and select the av input to which the av cable is connected.

It’s complicated by description, but if you would options by yourself or review by video, that will be much simple. You can leave message at www.pakite.net , we will contact with you as soon as possible.


PAKITE Wireless Network set-top box sharing Device

PAKITE Wireless Network set-top box sharing Device: Wireless TV Sender




Now everyone watch digital TV programs, but are different from analog era, a set-top box(cable box) can only match a TV. If you have two TV set at home, then you have to buy two set-top boxes. TV set-top box is not installed will become decoration. If re-install another set-top box, in addition to the purchase cost of set-top box, the set-top box will have to pay a monthly fee. Most family will choose the set-top box installed in the sitting room, so that when we need in the other room to watch digital TV (share tv signal wirelessly) will encounter problems. In fact, we do not usually watch TV in a fixed place, more often, we in the living room during the day and watch the evening want to continue to watch in the bedroom, so if there no cable boxes in the bedroom, it cannot continue to watch digital TV programs. Not only the digital set-top box will encounter this problem, when using DVD player, satellite TV receiver and other A/V device have the same trouble.
Digital set-top boxes generally divided broadcast, basic, enhanced (IPTV demand type). Which enhanced STB is powerful, it not only brings us a rich live television programs, also provide vast amounts of TV on demand, video playback. The event, news, review you missed can watch again. However, enhanced set-top box price and the monthly cost is relatively high, with the set-top box on each TV, this is absolutely typical waste of resources.


A set-top box can only to a TV set, thought of lying on the bed to watch TV in the room, but the room do not have the line to connect, set-top boxes can not be detached and moved to the room. Install a set-top box and have to pay rent, but also not commonly used. Pakite audio video signal stb wireless sharing device will help you! It is named wireless av sender ( It includes an av transmitter and a receiver ). Implementation can watch digital TV in the room, if you want to change the channel, do not need to be running around, you can change channels in the room directly! The range of available machine: digital set-top boxes, satellite set-top boxes, DVD player, AV audio-visual equipment such as DV machine!


Friday, September 9, 2016

How Wireless audio video TV Transmitter Work



How Wireless TV AV Sender Work


Let’s talk wireless av sender connection by picture. And step by step.
wireless av sender and receiver
Transmitter:
How does wireless tv transmitter receiver work? It's simple really; let's use PAT-220 av sender as an example. The Transmitter connects to your STB by AV cables. Your STB signal is then wirelessly transmitted, through walls and ceilings, to the Receiver.

Receiver:
The Receiver picks up the STB signal sent from the Transmitter and displays it on your TV in another room. you can still use your STB remote to control your STB box using the built-in IR Remote Control.


Connection:
Transmitter Connection:
Just place the av transmitter above the STB, connect av transmitter with STB by AV cable in the right way, as the picture show.
Transmitter connection
Receiver Connection:
Place the receiver besides the tv, and connect the tv by av cable in the right way,as the picture show.


Receiver connectiong


IR Cable Connection:
Connect the IR Cable with Transmitter, and stick the infrared receiving at the infrared of STB receiver, like the following picture.
IR cable connection


When you finish the above the step, get the power, you can watch program at different rooms.

But one more thing need to pay attention is: all of receiver were getting the same signal from transmitter, so all of the receiver was display the same program at different monitor.

Wireless TV AV Sender



Five reasons to choose PAKITE

Why buy from PAKITE Technology?


PAKITE is a factory of wireless av sender, AV Senders are an integral part of our product range , we've been producing them for over 7 years now.
Our wireless AV sender range is hand-picked from the wireless av sender industry has to offer. You can buy inferior, cheap AV senders from eBay, however you won't find units of a better quality with favorable price and service as PAKITE.

Multi choice:
We have 17 models of wireless av sender, 2.4ghz frequency band has 11 models and 5.8ghz frequency band has 6 models. 2.4ghz and 5.8ghz is free frequency band for personal use. Now market has so many 2.4ghz frequency band wireless device (cordless telephone, mouse, keyboard, wifi router), signal may interference between those wireless device. So we produce theproduct with different frequency band for avoid interference.
Stable transmission:
According the user feedback, their wanna use STB and TV at different floor, so we design wireless av sender model PAT-266and the PAT-260 and the PAT-360, those mode is for different floor, 350 meter transmission range at open space, even though passed one floor, the picture still stable and clear.
Good quantity:
All of good were test at least three times before shipment.
Fast deliver:
Neutral brand 100sets: 1-2 workdays.
Neutral brand 500sets: 5-7 workdays.
OEM: MOQ:500sets; Deliver date: 20-25 workdays after confirm the samples.
After sale service:
We provide one year warranty o all of end user, even if you buy it from ebay or Amazon, any questions you can feedback to us, our tech team will try to solve for you.


Now, Thousands of  clients had choose PAKITE brand wireless av sender, and you?


Thursday, September 8, 2016

Why We Choose Wireless Audio-Video Transmitter and Receiver?



  Someone may ask this question: I have cable service in my living room only. but I want to watch TV in my bedroom and don't want to run a cable. Is there a device that will let me remotely have TV in my bedroom without running a cable?
 Yes, of course. It's called wireless AV Sender( you can call it wireless tv sender too ), which can realize the audio video signal sharing in different rooms for family entertainment. The wireless av sender consists of a transmitter and a receiver. On a small scale, it works the same way as a TV antenna only instead of a local broadcast station sending a signal out to anyone who has an antenna, the TV in your living room will be the sender of the signal for the receiver in your bedroom .
   PAKITE Wireless AV transmitter and receiver is well known and professional. We have kinds of Audio Video receiver and transmitter for different demands. It adopting advanced 2.4GHz/5.8GHz wireless transmission schemes and having advantages of long distance transmission, strong anti-interference and high mobility. By means of radio waves, it can transmit the signal from DVD player, DVR, CCTV camera, IPTV, Satellite receiver, Digital TV Set Top Box or any other A/V devices at transmitter end to TV sets in different room at receiver end. Moreover, it can support the IR remote control at the av receiver end to realize the function of wireless control of devices from another place. So that you can enjoy freely wireless HD AV sharing data and Hi-Fi audio and video effect.
   My advice is to have the transmitter and receiver in as open a space as possible to avoid any interference.
   Besides, if your family or neighbor were installed 2.4GHz equipment such as Wireless WIFI or cordless telephone, please choose 5.8G series AV transmitter and receiver. 

  Choosing wireless audio video transmitter and receiver, It enables you to satisfy the transmission of A/V device and digital TV STB device. It enables you to easily realize wireless sharing of SD AV data and enjoy untrammeled hi-fi audio and visual effects. 

Wireless IR Remote Control


Some questions comes up with wireless av sender systems, so this paragraph is for expound IR remote control function.

1: Why I need the Sender & Receiver with IR Remote Control? I have tv controller, I can change channels at tv end.
First, Why need IR Remote Control function? if you wanna change channels at tv end, you have to use PAKITE PAT-220 with IR Remote Control. Normally, we settle tv and set top box in the same room, so we can control at the tv end. but actually, you are not control tv, you are control set top box, if set top box and tv in the different room, you will find can not change channels at tv end, if you use Wireless AV Sender with IR Remote, then you can.

2. How do you control A/V devices from another room (e.g. change the channel on your cable box)? That’s where the IR extender comes in.
The IR extender is a cable that plugs into the PAKITE transmitter and has one blocks on it. You will find a blocks marked IR, and please noticed stick the IR cable in front of the device’s(DVD/STB and so on) infrared light. Then when you point the device’s own remote at the PAKITE receiver unit, which is connected to the IR extender, you can operate the device just as if you were pointing the remote at it directly.

We suggest wireless av sender with ir remote control (like PAT-220/PAT-530)for tv user, since end user need change channels at tv end, wireless av sender without ir remote control (like PAT-330/PAT-360) for cctv camera user. PAKITE would provide the best choice with low cost to clients.


HDMI VS SD Wireless AV Transmitter

HDMI TV and Set Top BOX had appeared on the market, clients may require HDMI wireless transmitter match with HDMI TV. At the same times, their will found he can not or hardly to find the HDMI wireless device supplier.
Here I'd like to state my personal opinion: why most of company would not produce HDMI ? HDMI already appeared on the market, it's correct, but still not the major market, that's the main reason why we would not produce Full HD AV Sender to expand the market.
For technique :  SD Resolution Wireless AV Sender support long range transmission, like PAKITE Brand PAT-260 Transmitter transmission rang is 350 meter. But if you ask for Full HD resolution, the transmission range will be very short(10 M-50 M without any hold back), and the penetrate ability will weak than SD Audio Video Transmitter, then it will be not suitable for used at different room or floor.
For Clients :  Unit price of HDMI video transmitter will be higher than SD Wireless AV Transmitter, SD Wireless AV Sender unit Price approximately $40-$60 if you buy one pcs at local market, the unit price will be much cheaper if you are agents , HDMI Wireless AV Sender EXW Price based on MOQ 100 sets will be $150 -$190,  it's too expensive for ender user, right?
Form Seller: $150 per sets as prime cost make HDMI market become small, it will no profit for the seller. Besides, at the first , buyer will hard to accept the cost .
That's the main reason why HDMI wireless av transmitter is hardly to search. besides, company would like develop wireless HDMI av sender if you has larger market with larger demands.
With wireless being the norm for so many of our electronic devices today, wireless av sender comes with it.
It’s also annoying when you want to put a TV in a room on the other side of the house from where your cable/satellite wiring enters it. I had this situation before I bought wireless av sender. I wanted to put a TV in my living room and bedroom, but there is a cable between set top box and tv. besides, two tv can not connect with one set top box, I am anxious to fixing this problems, but at that time only one option—running the wires along the ceiling and floorboards inside the house or running them over the roof on the outside—was desirable.
Now I found wireless av sender model PAT-260, it support used in different rooms and different floor, wireless transmission make installment step become easier, besides, also you can change channels at tv end, that a surprise, right? normally you have to change channels at set top box end if you know it very well.
You can also use the system to transmit audio and video signals wirelessly from other devices besides your cable box (e.g. DVD players, home theaters, gaming consoles) to your TV. Also, the model is marked SD resolution, but I think it's no difference with HD Wireless AV Sender.
Wireless tv sender use method is very easy, You simply connect the transmitter unit to your digital box and the receiver unit to your TV. Both of them connect using RCA connectors (the ones with the red/white/yellow plugs), which are provided with the units. You then just play with the antennas to align them so the signal moves as directly as possible between the two rooms.
If you have any questions about how to use, please review the video by search key works" PAKITE wireless av sender " at Youtube or Contact Us, we will help you how to install step by step.